Mageleka
MagnoMeter XRSTM

Particle Suspension Characterisation Analyser

  • Remote operation for controlled or hazardous substances
  • Direct Digital Synthesis technology
  • Simple and intuitive software

Download
brochure    Request
quote

Beckman Coulter LS 13 320 XR Laser Diffraction Particle Size Analyser 21 CFR Part 11

MagnoMeter XRS – Particle Suspension Characterisation Analyser

The MagnoMeter XRS™ suite of instruments provides unmatched functionality and unparalleled particle suspension characterisation analyser, at any stage of the formulation or manufacture process, across any industry.

Mageleka’s flagship instrument is the MagnoMeter XRS™ RelaxoMeter, a powerful and versatile next-generation benchtop low-field NMR spectrometer that provides fast, accurate, particle suspension characterisation and solid-liquid interface analysis of dispersions and liquid-liquid interface analysis of emulsions. It is ideal for fundamental formulation R&D, rapid QC of incoming raw materials, and QA of final commercial products.

The RelaxoMeter Flow is ideal for use with heterogeneous suspensions where batch sampling is problematic. Use it to monitor milling processes in real time, and under industry-relevant conditions. Also for investigation of the impact of continuous addition of chemical reactants, and for laboratory studies of process control.

The SedimentoMeter is a simple benchtop device for: determining settling/sedimentation rates of slurries, investigating particle aggregation (coagulation/flocculation), and measuring fast or slow kinetic processes and mechanisms. It is ideal for accelerated aging and shelf-storage studies

  • Key Features

    Separate magnet/probe assembly pod

    Easily exchangeable for different nuclei and/or higher field strength magnets

    Highly customizable pulse sequencing

    Phase cycling, composite pulses, two channel RF, and 1D, 2D, and 3D shaped gradients

    Remote operation

    For use in controlled, hazardous, or radioactive environments.





    Uses regular length NMR tubes

    Four diameters available, from 2mm (highest resolution) to 10mm (lowest resolution)

    Simple and intuitive software

    Easy to use and upgrade PC software and a dedicated dual core ARM9 processor running Debian

    All industry relevant concentrations

    Measure materials or products at any stage of the formulation and manufacturing process

  • Applications

    Raw Materials

    Ink-jet

    API Solution

    Pigment Dispersion

    Cosmetics

  • Capabilities

    Separate magnet/sample probe assembly

    The magnet/sample probe assembly – called a MagnoPod™ – is a separate, temperature-controlled unit. This practical feature allows the MagnoMeter XRS™ devices to be operated remotely. Each unit can accommodate multiple MagnoPods™, which adds flexibility and extends the scope of any application. The MagnoMeter XRS™ devices are ideal for use in controlled or hazardous environments, and can be integrated into production equipment. The small footprint saves space in any lab, and the low weight makes it easily portable.

    By direct digital synthesis (DDS)

    At the heart of the MagnoMeter XRS™ is state-of-the-art NMR technology (patent-pending). It features Direct Digital Synthesis, which incorporates a software defined radio device. Radio frequency generation and detection is done digitally; there are no analogue multiplexing steps in detecting the NMR signal. This next-generation technology provides the MagnoMeter XRS™ devices with exceptional resolution of complex solid-liquid and liquid-liquid formulations at any concentration – and at significantly faster speeds than the competition.

    MagnoSoft™: simple and intuitive software

    Measurements using the MagnoMeter XRS™ devices are based on the simple and intuitive MagnoSoft™ program, and operation requires minimal training and expertise. The MagnoSoft™ program can control multiple MagnoPods™ from one central control unit, which adds incredible flexibility and eliminates the need to purchase multiple instruments.

    Highly-customisable pulse sequencing

    The MagnoMeter XRS™ features phase cycling, composite pulses, and two-channel radio frequency and 3D shaped gradients, all customizable by the pulse programming interface of the MagnoSoft™ program. This makes possible 1D, 2D, and 3D imaging, robust self-diffusion measurement (10-9 to 10-13 m2s-1), droplet sizing analysis, polymer characterization in solution and melts, and more.

    Uses regular length NMR tubes

    With the MagnoMeter XRS™ there is no need to change the way you work – or the type of NMR tube you use. It is challenging to fill a narrow NMR tube with a highly viscous fluid, so larger-diameter tubes are needed. Conversely, when sample volume is very low, or higher resolution is needed, a narrow-diameter tube is ideal. Accordingly, the MagnoPod™ can accommodate four different diameter NMR tubes: 2 mm (highest resolution), 4 mm (standard resolution), 8 mm (lower resolution) and 10 mm (lowest resolution).

    Measurements have never been easier

    The MagnoMeter XRS suite of products offers the user a wide degree of flexibilty to meet their individual need. Do you need to measure samples at multiple locations, or analyse multiple nuclei? The MagnoPod™ is easily exchangeable, and convenient additional pods are available for a wide range of nuclei (including 7Li, 19F and 32P). Multiple MagnoPods™ can be connected and driven by one controller, all run by the powerful MagnoSoft™ program. Sometimes the difference between success and failure is a matter of degrees. All MagnoPods™ come standard with a temperature exchanger unit installed. An optional upgrade to a Peltier controlled system is available. Need more resolution? Higher field magnets are available. Talk to us, and we can tailor the MagnoMeter XRS™ to meet your specific needs.

Not sure if it’s the right instrument?

No worries, send us a sample and we will test it for you

Send a sample

  • Outstanding service

    I have been using Meritics for a number of years and they always provide outstanding service and support.
    They have a rapid response turnarounds and are very knowledgeable of the techniques and products they provide.

    LeanneB-375

  • Good service, very helpful

    We use Meritics for the PM service and installation of all our FlowCams . Megan has been coming to our site for a number of years. She is very efficient in her work, but most of all Megan is very helpful. We have had issues with one of instruments after the install and Megan did her utmost to try and solve it while on site, even though it wasn’t solved Megan has been in contact with the supplier of the instrument to try and solve this problem for us.

    SophieH-2201

  • Job done in a friendly manner

    Booking engineer visits is always easy. David Lowe, Meritics engineer is always very friendly.

    ThierryN

  • Service/calibration visit

    Excellent service, arrived on time, polite, friendly and informative.

    NathamM-270

  • 5 Stars

    Excellent service from an excellent company. Would recommend them to anyone.

    BarryH-480

  • Good Service

    David, our service engineer as usual was good at communicating and setting up the recent service appointment, he arrived on time, did the service promptly and informed me of any problems. Friendly and helpful

    TomA-446

  • Superb and prompt service

    I have used this company through the laboratory I work for frequently. We specialise in soil analysis, and Meritics were chosen as they have extensive knowledge of the instruments we use. We have several laser particle diffraction analysers with a service contract, and service is always very prompt and meticulous….

    JamesG-2483

  • Good experience over two years

    Meritics have covered the annual servicing of our Multisizer 4e instrument since we purchased it from them just over two years ago. The application scientist who performed the servicing was friendly, knowledgeable, and extremely helpful, happily answering a barrage of questions about how best to use and maintain the instrument. All my interactions with Meritics staff have been positive. I would happily recommend them.

    RajG-62

  • Fully committed to customer service

    Service second to none, both units serviced and all questions answers by engineer while on site.

    RichardA-786

  • Highly recommend Meritics for equipment purchases and aftercare services

    After owning one of our instruments for over 8 Years which was purchased from Meritics, it suffered its first breakdown. Upon contacting Meritics, I was instantly put through to an engineer who was very helpful. Upon inspection of the manual, it was decided that it would be more cost effective to have a Meritics engineer visit. The Meritics staff were very communicative and kept me up to date.

  • Excellent Service

    Lovely, friendly and extremely helpful. David and his team are always on call with advise and are very easy to work with and are always happy to help.

    NaomiT-64

  • Service of lab equipment

    Excellent service. Friendly and professional service was provided in a timely manner to the expected standard.

    NathanM-270

  • Excellent

    Excellent communication. Updates given well in advance. Very polite staff and engineers.

    NathanM-270

  • Multisizer 4e install at pharmaceutical company

    2 people helped with the install of a Multisizer 4e. They were both very professional and friendly, answering any questions that I had. The installation was quick and the attention to good documentation practice was exceptional.

    Chloel-9

  • Service of Beckman Coulter instruments

    Always a pleasure to welcome the Meritics service engineer, who is knowledgeable, personable and extremely competent.

    NeilT-394

  • Professional

    Friendly and collaborative staff, provided a very good service.

    SamK-403

  • Professional, Customer-oriented, fast service

    We had issues with one of the aperture tubes provided by Meritics on a Friday afternoon, while very pressed for a review deadline. Meritics handled our inquiries very fast and professionally and helped us out by shipping us their spare tube to use in the mean time free of charge, while we waited for our new tube to arrive. Communication was very pleasant.

    VeerleB

  • Very helpful and prompt

    I emailed for some technical help and also to get some spares and both the engineer (David) and purchasing (Sophie) were very prompt to respond and helpful. We do have a service contract but I appreciated being able to email the engineer directly.

    AlexH-474

  • Excellent Service

    Used Meritics to conduct particle size distribution by laser diffraction. Service as last time, is very quick, well priced and professional.

    I would highly recommend

    GavinR-101

  • Excellent and Friendly Service

    Always a pleasure to deal with the people at Meritics Ltd. They understand the importance of our work and the fact that our research projects have deadlines that need to be met. Consequently, problems are dealt with very quickly and professionally and they are willing to go that one step further to make sure their supply chain problems don’t become our problems. Thank you to the team for their support. It is greatly appreciated.

    JanetH-255