Beckman Coulter
BioLector XT
Microbioreactor
- Multiple processe
- Enhanced PIDS Technology
- Real data down to 10nm
-
Key Features
Innovative New Gassing Head
- Enables fed-batch experiments under anaerobic conditions
- Gassing with O2 within a range of 1% – 100% and with CO2 within 1% – 12 %
- Reduces gas consumption to a few mL/minute
- Optional humidification of gases reduces evaporation
Optional Microfluidic Module
- Unleashes full potential of the BioLector XT
- Complements online monitoring function with well-specific pH regulation/feeding
- Enables use of 2 reservoir wells per 4 cultivation wells
- Microvalves allot liquids at nanoliter-scale
“Plug-and-play” Plate Design
- Real-time kinetics out of 48/32 parallel cultivations
- Customisable feeding strategies (batch, fed-batch, bolus, continuous)*
- Control of pH on-the-plate with pre-calibrated optical sensors*
- Small working volume (800 – 2400 μL)
*Functionality requires optional microfluidic module
Intelligent BioLection Software
- Intuitive user interface supports multi-user environments
- Free programming of all control parameters
- Open system enables live data downloads
- Fast processor ensures rapid download of experiment data
-
Technical Specs
Volume800 – 2400 µL
pH RangepH 4 – 7.5 (depending on plate)
Scattered Light MeasurementResolution > 50 NTU, at densities higher than 500 NTU: 10 % of measured value.
Height522 mm(20.6 in)
Width797 mm(31.4 in)
Depth520 mm(20.5 in)
Temperature range10 – 50 °C (minimum temperature 8 °C below ambient temperature)
DO Range0 – 100% oxygen saturation (100% corresponding to the DO level reached while gassing with 100% O2 without O2 consumption)
Wavelengths365 nm–800 nm
Weight61 kg(134.5 lb)
-
Accessories
Microfluidic Module
The microfluidic (MF) module for the BioLector XT microbioreactor allows you to run up to 32 highly flexible, pH-controlled fed-batch cultivations in microscale during one cultivation experiment run.
Anaerobic Clutivation
The anaerobic module for the BioLector XT microbioreactor enables strict anaerobic fermentation processes combined with a controlled, low nitrogen gas flow rate.
CO2 Up Regulation
With the CO2 up-regulation module the microbioreactor continuously measures the CO2 level inside the chamber and automatically regulates the flow of CO2 into the chamber.
LED Filter
With the LED / filter module, the microbioreactor can measure additional fluorescences. An LED unit and two optical filter glasses are installed inside the BioLector microbioreactor.
O2 Down Regulation
With the O2 down-regulation module the microbioreactor continuously measures the oxygen level inside the chamber and automatically regulates the flow of nitrogen into the chamber.
O2 Up Regulation
With the O2 up-regulation module the microbioreactor continuously measures the oxygen level inside the chamber and automatically regulates the flow of oxygen into the chamber.
There is more information on all the accessories on the Beckman Coulter website
-
Applications
Yeast
E. coli
Probiotic Bacteria
Plant Cells
Not sure if it’s the right instrument?
No worries, send us a sample and we will test it for you
Send a sample-
Outstanding service
I have been using Meritics for a number of years and they always provide outstanding service and support.
They have a rapid response turnarounds and are very knowledgeable of the techniques and products they provide.LeanneB-375
-
Good service, very helpful
We use Meritics for the PM service and installation of all our FlowCams . Megan has been coming to our site for a number of years. She is very efficient in her work, but most of all Megan is very helpful. We have had issues with one of instruments after the install and Megan did her utmost to try and solve it while on site, even though it wasn’t solved Megan has been in contact with the supplier of the instrument to try and solve this problem for us.
SophieH-2201
-
Job done in a friendly manner
Booking engineer visits is always easy. David Lowe, Meritics engineer is always very friendly.
ThierryN
-
Service/calibration visit
Excellent service, arrived on time, polite, friendly and informative.
NathamM-270
-
5 Stars
Excellent service from an excellent company. Would recommend them to anyone.
BarryH-480
-
Good Service
David, our service engineer as usual was good at communicating and setting up the recent service appointment, he arrived on time, did the service promptly and informed me of any problems. Friendly and helpful
TomA-446
-
Superb and prompt service
I have used this company through the laboratory I work for frequently. We specialise in soil analysis, and Meritics were chosen as they have extensive knowledge of the instruments we use. We have several laser particle diffraction analysers with a service contract, and service is always very prompt and meticulous….
JamesG-2483
-
Good experience over two years
Meritics have covered the annual servicing of our Multisizer 4e instrument since we purchased it from them just over two years ago. The application scientist who performed the servicing was friendly, knowledgeable, and extremely helpful, happily answering a barrage of questions about how best to use and maintain the instrument. All my interactions with Meritics staff have been positive. I would happily recommend them.
RajG-62
-
Fully committed to customer service
Service second to none, both units serviced and all questions answers by engineer while on site.
RichardA-786
-
Highly recommend Meritics for equipment purchases and aftercare services
After owning one of our instruments for over 8 Years which was purchased from Meritics, it suffered its first breakdown. Upon contacting Meritics, I was instantly put through to an engineer who was very helpful. Upon inspection of the manual, it was decided that it would be more cost effective to have a Meritics engineer visit. The Meritics staff were very communicative and kept me up to date.
-
Excellent Service
Lovely, friendly and extremely helpful. David and his team are always on call with advise and are very easy to work with and are always happy to help.
NaomiT-64
-
Service of lab equipment
Excellent service. Friendly and professional service was provided in a timely manner to the expected standard.
NathanM-270
-
Excellent
Excellent communication. Updates given well in advance. Very polite staff and engineers.
NathanM-270
-
Multisizer 4e install at pharmaceutical company
2 people helped with the install of a Multisizer 4e. They were both very professional and friendly, answering any questions that I had. The installation was quick and the attention to good documentation practice was exceptional.
Chloel-9
-
Service of Beckman Coulter instruments
Always a pleasure to welcome the Meritics service engineer, who is knowledgeable, personable and extremely competent.
NeilT-394
-
Professional
Friendly and collaborative staff, provided a very good service.
SamK-403
-
Professional, Customer-oriented, fast service
We had issues with one of the aperture tubes provided by Meritics on a Friday afternoon, while very pressed for a review deadline. Meritics handled our inquiries very fast and professionally and helped us out by shipping us their spare tube to use in the mean time free of charge, while we waited for our new tube to arrive. Communication was very pleasant.
VeerleB
-
Very helpful and prompt
I emailed for some technical help and also to get some spares and both the engineer (David) and purchasing (Sophie) were very prompt to respond and helpful. We do have a service contract but I appreciated being able to email the engineer directly.
AlexH-474
-
Excellent Service
Used Meritics to conduct particle size distribution by laser diffraction. Service as last time, is very quick, well priced and professional.
I would highly recommend
GavinR-101
-
Excellent and Friendly Service
Always a pleasure to deal with the people at Meritics Ltd. They understand the importance of our work and the fact that our research projects have deadlines that need to be met. Consequently, problems are dealt with very quickly and professionally and they are willing to go that one step further to make sure their supply chain problems don’t become our problems. Thank you to the team for their support. It is greatly appreciated.
JanetH-255