Beckman Coulter
LS 13 320 XR
Laser Diffraction Particle Size Analyser
- Expanded measurement range 10 nm – 3,500 µm
- Enhanced PIDS Technology
- Real data down to 10nm
-
Key Features
Spot Small Differences
- Particle Size Analyser with expanded measurement range: 10 nm – 3,500 µm
- Laser diffraction plus advanced Polarization Intensity Differential Scattering (PIDS) technology enable high-resolution measurement & reporting of real data down to 10 nm
- Provides accurate, reliable detection of multiple particle sizes in a single sample
Easy-to-use Software
- ADAPT Software features automatic pass/fail check
- Pre-configured methods deliver results with 3 clicks or less
- Simplifies analyser operation by experts & novice users alike
- 1-click overlay with historical data
- Intuitive user diagnostics keep you informed during sampling
- Simplified method creation for standardised measurements
ADAPT Software enables 21 CFR Part 11
PIDS Technology* for Direct Detection of 10 nm Particles
- 3 light wavelengths (450, 600, & 900 nm) irradiate samples with vertical & horizontal polarized light
- Analyser measures scattered light from samples over a range of angles
- Differences between horizontally & vertically radiated light for each wavelength yield high-resolution particle size distribution data
-
Technical Specs
TechnologyLow-angle forward light scattering with additional PIDS(Polarization Intensity Differential Scattering) Technology. Analysis of vertical and horizontal polarized light at six different angles using three additional wavelengths. Full implementation of both Fraunhofer and Mie Theories.
Light SourceDiffraction: Laser Diode (785 nm)
PIDS: Tungsten lamp with high-quality band-pass filters (475, 613 and 900 nm)Particle size analysis rangeMeasurement range: 10 nm – 3,500 µm
Dry Powder System Module (DPS): 400 nm – 2,000 µm
Universal Liquid Module (ULM): 10 nm – 2,ooo µmElectrical interfaceUSB
Power consumption≤ 6 amps @ 90 – 125 VAC
≤ 3 amps @ 220 – 240 VACTemperature range10 – 40°C (50 – 104°F)
Humidity0 – 90% without condensation
ComplianceCreates 21 CFR Part 11 enabling features
RoHS
Certifications:
– EU EMC Directive 2014/30/EU
– CISPR 11:2009/A1:2010
– Australia and New Zealand RCM MarkData export file formatsXLSX, TSV, PDF
File import capabilityFrom all LS 13 320 Legacy and LS 13 320 XR system
*Software operating systemRequires Microsoft Windows 10, 64-bit environment
(US, English regional settings only)DimensionsHeight: 19.5″ (49.53 cm)
Width: 37″ (93.98 cm)
Depth: 10″ (25.4 cm)Weight52 lbs (23.5 kg)
-
Accessories
Dry Powder System
Analytical size range: 400 nm – 3,500 µm
- Measures entire sample as required by the ISO 13 320 Standard
- Programmable Obscuration setting to optimize sample feed rate
- User-selectable vacuum pressure for maximum dispersion control
Universal Liquid Module
Analytical size range: 10 nm – 2,000 µm
- Fully automatic with auto-dilution, auto-filling and auto-rinsing
- Analyses samples suspended in aqueous as well as non-aqueous diluents for maximum flexibility
- Wetted materials list: Teflon®, 316 Stainless Steel, Glass, Kal-rez® and PEEK
Sonicator Control Unit
- Needle probe sonicator for additional dispersion control of wet samples
- Fully adjustable power settings
- In-situ sonication with ULM before/during the run, can also be operated external to module
EU Vacuum Cleaner
- Vacuum pressure range fully adjustable
- Integrated vacuum control unit for optimised vacuum/obscuration settings
- Two vacuum systems to choose from
-
Applications
Soils
Nanocellulose
Pigments
Cement
Capabilities
The LS 13 320 XR particle size analyzer uses advanced laser diffraction and PIDS technology for the sizing of non-spherical, sub-micron particles. Initially, particle sizing by laser diffraction was limited to the use of the Fraunhofer diffraction theory. Laser diffraction offers a number of advantages – laser diffraction analyzers go beyond simple diffraction effects. General approaches are now based on the Mie theory and the measurement of scattering intensity over a wide scattering angular range is employed.
Using PIDS Technology
Pioneered by Beckman Coulter, most laser diffraction manufacturers use the above two approaches, i.e., wide angular detecting range and short wavelength, to size small particles. However, sizing even smaller particles (tens of nanometers in diameter), cannot be achieved using only these two approaches. Any further increase in scattering angle will not yield any significant improvement due to the everslower angular variation. Figure 2 is a 3-D display that illustrates the very slow angular variation for small particles. For particles smaller than 200 nm, even by taking advantage of the above two approaches, it is still difficult to obtain an accurate size.
Not sure if it’s the right instrument?
No worries, send us a sample and we will test it for you
Send a sample-
Outstanding service
I have been using Meritics for a number of years and they always provide outstanding service and support.
They have a rapid response turnarounds and are very knowledgeable of the techniques and products they provide.LeanneB-375
-
Good service, very helpful
We use Meritics for the PM service and installation of all our FlowCams . Megan has been coming to our site for a number of years. She is very efficient in her work, but most of all Megan is very helpful. We have had issues with one of instruments after the install and Megan did her utmost to try and solve it while on site, even though it wasn’t solved Megan has been in contact with the supplier of the instrument to try and solve this problem for us.
SophieH-2201
-
Job done in a friendly manner
Booking engineer visits is always easy. David Lowe, Meritics engineer is always very friendly.
ThierryN
-
Service/calibration visit
Excellent service, arrived on time, polite, friendly and informative.
NathamM-270
-
5 Stars
Excellent service from an excellent company. Would recommend them to anyone.
BarryH-480
-
Good Service
David, our service engineer as usual was good at communicating and setting up the recent service appointment, he arrived on time, did the service promptly and informed me of any problems. Friendly and helpful
TomA-446
-
Superb and prompt service
I have used this company through the laboratory I work for frequently. We specialise in soil analysis, and Meritics were chosen as they have extensive knowledge of the instruments we use. We have several laser particle diffraction analysers with a service contract, and service is always very prompt and meticulous….
JamesG-2483
-
Good experience over two years
Meritics have covered the annual servicing of our Multisizer 4e instrument since we purchased it from them just over two years ago. The application scientist who performed the servicing was friendly, knowledgeable, and extremely helpful, happily answering a barrage of questions about how best to use and maintain the instrument. All my interactions with Meritics staff have been positive. I would happily recommend them.
RajG-62
-
Fully committed to customer service
Service second to none, both units serviced and all questions answers by engineer while on site.
RichardA-786
-
Highly recommend Meritics for equipment purchases and aftercare services
After owning one of our instruments for over 8 Years which was purchased from Meritics, it suffered its first breakdown. Upon contacting Meritics, I was instantly put through to an engineer who was very helpful. Upon inspection of the manual, it was decided that it would be more cost effective to have a Meritics engineer visit. The Meritics staff were very communicative and kept me up to date.
-
Excellent Service
Lovely, friendly and extremely helpful. David and his team are always on call with advise and are very easy to work with and are always happy to help.
NaomiT-64
-
Service of lab equipment
Excellent service. Friendly and professional service was provided in a timely manner to the expected standard.
NathanM-270
-
Excellent
Excellent communication. Updates given well in advance. Very polite staff and engineers.
NathanM-270
-
Multisizer 4e install at pharmaceutical company
2 people helped with the install of a Multisizer 4e. They were both very professional and friendly, answering any questions that I had. The installation was quick and the attention to good documentation practice was exceptional.
Chloel-9
-
Service of Beckman Coulter instruments
Always a pleasure to welcome the Meritics service engineer, who is knowledgeable, personable and extremely competent.
NeilT-394
-
Professional
Friendly and collaborative staff, provided a very good service.
SamK-403
-
Professional, Customer-oriented, fast service
We had issues with one of the aperture tubes provided by Meritics on a Friday afternoon, while very pressed for a review deadline. Meritics handled our inquiries very fast and professionally and helped us out by shipping us their spare tube to use in the mean time free of charge, while we waited for our new tube to arrive. Communication was very pleasant.
VeerleB
-
Very helpful and prompt
I emailed for some technical help and also to get some spares and both the engineer (David) and purchasing (Sophie) were very prompt to respond and helpful. We do have a service contract but I appreciated being able to email the engineer directly.
AlexH-474
-
Excellent Service
Used Meritics to conduct particle size distribution by laser diffraction. Service as last time, is very quick, well priced and professional.
I would highly recommend
GavinR-101
-
Excellent and Friendly Service
Always a pleasure to deal with the people at Meritics Ltd. They understand the importance of our work and the fact that our research projects have deadlines that need to be met. Consequently, problems are dealt with very quickly and professionally and they are willing to go that one step further to make sure their supply chain problems don’t become our problems. Thank you to the team for their support. It is greatly appreciated.
JanetH-255